moreyes
07-07-2010, 06:35 PM
Been having issues with our Aqua Rite unit, the issue is reading accurite salt levels, cleaned the cell, scoured the Goldline website for info etc....
It is not reading the salt thus not genrtating chlorine, it shows the salt ppm at 2200, voltage at 30, no cell current, desired output at 100%, instant salt at 0,
Had it tested out salt is way high, my wife who is the pool keeper got carried away, it is at 5000ppm and yes i realize that is way hi, and will dilute it down.
Called Goldline, they where as much help as paper bag full of pool water. said to call a dealer, a little hard to call some one out when you repair industrial and commercial HVAC equipt for a living. All I wanted was some troubleshooting info.
Oh yah, the check salt and check cell light are on steady.
From what I gathered the cell appears to bad. The salt ppm reading has been goofy all spring, it read fine for awhile, but they way it was acting and all the rain made it appear out salt was getting diluted.
It is 4 yrs old, a little dissipointed on the life of the cell. What do you think bad cell?
It is not reading the salt thus not genrtating chlorine, it shows the salt ppm at 2200, voltage at 30, no cell current, desired output at 100%, instant salt at 0,
Had it tested out salt is way high, my wife who is the pool keeper got carried away, it is at 5000ppm and yes i realize that is way hi, and will dilute it down.
Called Goldline, they where as much help as paper bag full of pool water. said to call a dealer, a little hard to call some one out when you repair industrial and commercial HVAC equipt for a living. All I wanted was some troubleshooting info.
Oh yah, the check salt and check cell light are on steady.
From what I gathered the cell appears to bad. The salt ppm reading has been goofy all spring, it read fine for awhile, but they way it was acting and all the rain made it appear out salt was getting diluted.
It is 4 yrs old, a little dissipointed on the life of the cell. What do you think bad cell?